Cabin spotlight, brass, dimensions 150 x 95 mm, E27, IP20, max 52W
Copper navigation light - STARBOARD
Reference: TP 3232-001
STARBOARD - GREEN, angle 112.5 range 2nm
Classic navigation lights, body made from pure copper sheet.
Certified for ships of less than 20m length.
Lamp holder BaY 15 d.
Comes without bulb.
in the same category
Navigation Light Set for Port- and Starboard ( Deck Mount ), 12V / 3W, Stainless Steel housing with Red / Green Lens, 57x35mm ( dxh ), Bulb: BA15d Stainless Steel A304 housing, Ø57mm, H=35mm, 12VDC Bulb type: Bayonet BA15D 12V/3 Splash proof. Pair of lights, 1 x red + 1 x green. Horizontal mount, 135°
Keyring - Monkey Fist, cotton/brass, red/white/blue
Boatswain's whistle with chain, brass/copper, L: 12cm, in SEA-CLUB paper gift box
Square ship window made from brass with cross pieces, size 55 x 55 cm, suitable for installation as skylight. The window can be locked into place when opened and tightly shut with the lever seals on the inside. The rubber gasket seals the window completely windproof. It is equipped with cross pieces that allow people to stand on the installed window.
A: Overall dimension 550 x 550 mm
B: Insert dimension 498 x 498 mm
C: Opening dimension 490 x 490 mm
D: Glass dimension 455 x 455 mm
p/n 1034-100 D1 100mm D2 110mm D3 180mm S 38mm w 3.2kg
p/n 1034-125 D1 125mm D2 135mm D3 205mm S 38mm w 4.0kg
p/n 1034-150 D1 150mm D2 160mm D3 230mm S 38mm w 4.4kg
p/n 1034-175 D1 175mm D2 190mm D3 255mm S 38mm w 5.0kg
p/n 1034-200 D1 200mm D2 210mm D3 285mm S 38mm w 6.4kg
p/n 1034-250 D1 250mm D2 265mm D3 350mm S 50mm w 11.2kg
p/n 1034-300 D1 300mm D2 310mm D3 390mm S 60mm w 14.4kg
Price per request
Stern light, copper, H=32cm W=16cm, antique
Price on request
Brass, with hanger and rope, Ø: 22,5cm
Brass, inside silverplated, H: 5cm, Ø: 3,8 / 3,4cm
Cork stopper with rope, L: 15cm, Ø: 3/4,5cm
Brass, H: 34cms, Ø: 4/15cm
ref no 3995-001 A=80mm €52.-
ref no 3995-002 A=120mm €64.-
ref no 3995-003 A=170mm €85.-
Holder for ship's and fog bells.
Made from sand-cast brass. Finish rolled and polished (unlacquered).
The "A" measurement should be at least 0.6 x the bell's diameter.
Prices incl. VAT 20%